![](/v/vspfiles/templates/255/images/DBox_Border_Left_Top.gif) |
![](/v/vspfiles/templates/255/images/clear1x1.gif) |
![](/v/vspfiles/templates/255/images/DBox_Border_Right_Top.gif) |
![](/v/vspfiles/templates/255/images/clear1x1.gif) |
High Pressure PEEK™ Unions, Tees, Crosses & Manifold
• Manufactured from PEEK™ polymer
• Pressure rated to 3,500 psi (241 bar) or higher
• Most include PEEK Fingertight fittings
Upchurch Scientific® High Pressure PEEK Unions, Tees and Crosses are ideal for connecting 2, 3 or 4 (respectively) tubes together. Upchurch's PEEK Manifold will allow for the connection of up to 7 tubes together. Both the bodies of the connectors as well as the fittings included are manufactured from PEEK (polyetheretherketone) polymer, ensuring high performance, biocompatibility, and chemical inertness.
PEEK Zero Dead Volume* (ZDV) unions can operate at pressures up to 6,000 psi (414 bar) with the included F-300 fittings at room temperature.
Please Note: The standard versions of these unions come with F-300 two-piece Fingertight Fittings. By ordering just the union body (part number ending in "-01"), you may select the 10-32 coned fittings of your choice.
PEEK Tees and Crosses can operate at pressures up to 3,500 psi (241 bar) with the included F-300 fittings at room temperature.
The PEEK Manifold can operate at pressures up to 6,000 psi (414 bar) and ships complete with F-331 Two-Piece Fingertight fittings.
All of these connectors feature 10-32 coned internal ports and are excellent for use with semi-rigid or rigid 1/16" OD tubing (e.g., PEEK, PEEKsil&trade, stainless steel, etc.> in applications up to 125 °C.
Please Note: Because these connectors are manufactured from PEEK, only polymer fittings should be used when connecting tubing to these items. The use of stainless steel, pre-swaged connectors will most likely result in permanently damaging your connector.
EA
This product manufactured by an ISO certified facility
|
|
![](/v/vspfiles/templates/255/images/clear1x1.gif) |
![](/v/vspfiles/templates/255/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/255/images/clear1x1.gif) |
![](/v/vspfiles/templates/255/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/255/images/clear1x1.gif)
|